|
|
Post by aussiemodler on Mar 10, 2017 14:38:34 GMT -7
Nice looking build stitch, seats and door trim will turn out nice.
|
|
|
|
Post by stitchdup on Mar 10, 2017 14:43:51 GMT -7
If the flocking still shows the pattern, on the back but if not it'll be flush. I still have to swap the headrests and make those cushions the vip cars all seem to have. If my hands dont hurt still tomorrow I'll be trying the flock
|
|
|
|
Post by coyotecrunch on Mar 11, 2017 6:44:06 GMT -7
O>M>G> - Now THAT Sounded Naughty!!! |
|
|
|
Post by stitchdup on Mar 11, 2017 14:03:50 GMT -7
|
|
|
|
Post by DeeCee on Mar 11, 2017 14:31:39 GMT -7
That stuff is COOL !!!! Looks great Les.
|
|
|
|
Post by Big D on Mar 11, 2017 16:24:16 GMT -7
That stuff is COOL !!!! Looks great Les. |
|
|
|
Post by stitchdup on Mar 12, 2017 13:54:30 GMT -7
Got the interior trim finished but I'm tempted to add some more to the parcel shelf just to keep the theme going. The headrests will be removed next (including the one already done cos it's not square, oopsies lol)  And I cant decide which wheels to use either.  1  2  3  4 |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 12, 2017 14:02:07 GMT -7
the wires look pretty good les so do the benz style in the 3 rd pic they fit the car but ya know
|
|
|
|
Post by lowlife on Mar 12, 2017 14:29:30 GMT -7
Love the interior....so you flocked it, from behind... e5037457_zpsameexuws Personally I'm liking the 5 spokes at the top, or 3rd down, the Benz style !  |
|
|
|
Post by DeeCee on Mar 12, 2017 14:31:25 GMT -7
Those inserts lookreal cool mate, and so does the FIRST set of wheels.
|
|
|
|
Post by stitchdup on Mar 12, 2017 16:05:37 GMT -7
I'm leaning toward the 5 spokes I think, I have some multi piece brakes they'll probably show off best and the bags might show through the rear wheels.
|
|
|
|
Post by coyotecrunch on Mar 13, 2017 5:15:23 GMT -7
5 spokes all the way
|
|
|
|
Post by 406 Silverado on Mar 13, 2017 6:36:39 GMT -7
1 or 3 look good to me. This looks great Les.
|
|
|
|
Post by Jay's Mini Scale on Mar 13, 2017 7:35:48 GMT -7
One looks good to me
|
|
|
|
Post by mustang1989 on Mar 13, 2017 12:52:30 GMT -7
I'm leaning toward the 5 spokes I think, I have some multi piece brakes they'll probably show off best and the bags might show through the rear wheels. I was thinking that too Les. Totally aweome work so far bud!! |
|
|
|
Post by midnightprowler on Mar 13, 2017 14:54:05 GMT -7
First 2 look good, but the first is best.
|
|
|
|
Post by stitchdup on Mar 13, 2017 15:28:44 GMT -7
Cheers guys, it'll be the first ones
|
|
|
|
Post by mustang1989 on Mar 14, 2017 7:09:43 GMT -7
Cheers guys, it'll be the first ones  |
|
|
|
Post by stitchdup on Mar 14, 2017 14:08:06 GMT -7
Started the body kit tonight. I wont be using the nail filler again, the stuff sets like concrete and has me flying so I had to stop for the night.  I'm just going for a deeper lip on the front and have removed the grille from the middle and will be leaving it open to show off the intercooler. At the rear I am only smoothing in the lower edge. Before  added lip, this is bigger so I can sand it down to shape  Shape pretty much set  the rear  |
|
|
|
Post by coyotecrunch on Mar 14, 2017 18:27:24 GMT -7
AwesomeSausage!!!!
|
|
|
|
Post by DeeCee on Mar 15, 2017 1:51:41 GMT -7
Gonna be a full custom by the looks of it mate. Nice work...
|
|
|
|
Post by stitchdup on Mar 15, 2017 14:09:22 GMT -7
A little more progress on the front bumper tonight. I added more plastic (used the grille section I removed as it was curved the way I needed) to the lip and sanded it to shape, and added some more to the ribbed section in the middle as it was too thin to sand down and in the gaps for the lights I filled (I could see through between the ribs) so I used some 1/4mm strip I had ordered by mistake. It is now thick enough to sand the shape into it once it's dry. If I can sand it well enough I might not need filler so my fingers are crossed, lol.   |
|
|
|
Post by Jay's Mini Scale on Mar 16, 2017 3:38:20 GMT -7
Looking good
|
|
|
|
Post by Big D on Mar 16, 2017 13:21:12 GMT -7
Lot of good work going on here Les.
|
|
|
|
Post by vcv8273 on Mar 18, 2017 3:32:06 GMT -7
Really nice scratch building and detail work. Looking forward to more
|
|
|
|
Post by stitchdup on Mar 22, 2017 8:39:20 GMT -7
|
|
|
|
Post by Big D on Mar 22, 2017 9:12:14 GMT -7
Those seats came out really nice Les.
|
|
|
|
Post by DeeCee on Mar 22, 2017 13:21:59 GMT -7
Those inserts have turned out just PERFECT !! You would never know they were not there from the beginning . praising-the-lord-smiley-emoticon
|
|
|
|
Post by stitchdup on Mar 22, 2017 13:56:34 GMT -7
Cheers guys
|
|
|
|
Post by coyotecrunch on Mar 22, 2017 18:13:27 GMT -7
Holy crappers - those seats are the bomb man - look awesome!!!
|
|
