Post by vcv8273 on Nov 23, 2016 2:24:19 GMT -7
Hi started this one in 2014 after seeing an feature in a magazine and loved the look of it. Have lowered it as far as I could using a modified independent front end and later model rear end. Using the rims and tyres from on of the testor kits and using a dodge v10 as motivation. Installed a flat firewall and front apron and am using a big alloy radiator which will be set up with twin thermo fans. I removed all of the roof gutter rails and trims around the front and rear screens and also changed the twin bonnet scoops for a molded in cuda scoop. Primered then painted in duplicolor acid rush rattle can. Wanted a different look from the rest of the superbee's out there so I came across a plain black stripe that I added along with one of the dirty donny superbee decals that I got of a mate of mine to replace the standard superbee stripe, think it looks the part, then clear coated in duplicolor rattle can. Thought I would post a few pics of it sitting next to a standard height superbee. Removed the rear seat and had to make up a frame to hold some flat sheet styrene so I could place rear buckets in its place. Had to brace the rear parcel shelf as it was flopping about without the seat. Will be extending the centre console to the rear of the buckets with another spare tub that I have. Thinking of doing the interior in bright red to contrast with the gold.Have been working on a chassis for it that I found in the parts box and currently modifying it to make it fit and will also install a new flat floor out of styrene for it. Cheers and thanks for looking
