|
|
Post by the1mad9hatter8 on Jul 31, 2019 5:53:22 GMT -7
So I have taken on a rather ambitious build , I had a old Mustang I had built and wasn't happy with it so I decided to rebuild it . Also the Enzo build was not working so I decided to put the two together and make a custom Mustang . I started with designing the chassis in my 3d program and printing it off while I gave the body a detol wash i might have to re do the chassis as it's not quite right  I then cut out the side vents and opened them up to make air flow into the engine compartment as it will be rear engine model   Then I started to make a wide body kit using Milliput to make it even more unique   |
|
|
|
Post by stitchdup on Jul 31, 2019 6:02:39 GMT -7
cool build, opening up the vents is a great idea and using the enzo parts is going to make for a wild car
|
|
|
|
Post by mmthrax on Jul 31, 2019 7:04:19 GMT -7
Hmmm....
This looks interesting...
|
|
|
|
Post by the1mad9hatter8 on Jul 31, 2019 8:00:42 GMT -7
Thanks chaps I hope it's going to turn out interesting and wild
|
|
|
|
Post by leon on Jul 31, 2019 13:01:17 GMT -7
This is going to look awesome!
|
|
|
|
Post by Deano on Aug 1, 2019 2:20:09 GMT -7
Great vision, keen to see the 2 come together.
|
|
|
|
Post by RetroSpectKustoms on Aug 1, 2019 19:13:18 GMT -7
Great idea, I'll be watching this one.
|
|
|
|
Post by Jay's Mini Scale on Aug 2, 2019 15:56:21 GMT -7
Liking the body mods I'll be watching this one
|
|
|
|
Post by the1mad9hatter8 on Aug 7, 2019 3:16:46 GMT -7
|
|
|
|
Post by DeeCee on Aug 7, 2019 4:31:44 GMT -7
That is looking WILD mate, and drop that Enzo engine in that thing and wake it up !!
There is a Ferrari powered Mustang on the net, google it, it is pretty awesome .
|
|
|
|
Post by the1mad9hatter8 on Aug 7, 2019 5:36:09 GMT -7
I have seen that but it's a front engine not rear so set up is different . Shame so can't copy too much of it but helping with ideas
|
|
|
|
Post by stitchdup on Aug 7, 2019 8:21:33 GMT -7
Cool, she's shaping up well
|
|
|
|
Post by poet on Aug 7, 2019 17:10:11 GMT -7
Nice!
|
|
|
|
Post by mmthrax on Aug 7, 2019 21:46:19 GMT -7
That's neat what you did with the chassis.
Watching this space....
|
|
|
|
Post by lowlife on Aug 8, 2019 12:06:09 GMT -7
Cool idea, I like it ! icon_bow
Just an idea, I saw a similar style build a while back where the guy milli-puttied a wide body kit and he then scanned it and 3D printed the arches ! Clever bit was he only puttied one side, as you can reverse the image before printing it again. Also once fitted he was able to cut out the original arches from behind to allow for some big rubber !
Don't know if you could do this, but thought I'd mention it !
|
|
|
|
Post by the1mad9hatter8 on Aug 8, 2019 17:20:06 GMT -7
Cool do you know how he scanned it as that sounds like a good idea
|
|
