1937 lincoln

i haven't been doing much model building this week as i've been printing this and a few parts for others. as long term members might remember, i've tried to build a 37 lincoln a couple of times before but failed miserably, lol. well now i have the printer i was able to resize an rc body from1/11 to 1/24 and it turned out pretty good. i'm having to reprint the trunk and hood as they didn't turn out good. theres some parts i could have reprinted but if it was a plastic kit i'd fix them so thats what i'll do here and show some tricks i've learned working with these prints. firstly this is much smoother than the mess of a vw i'm building so i might not even need much filler primer. I am going to use all printed parts on this and will be printing them myself to show that even a novice (i consider myself a novice as it takes me a long time to figure out problems) at printing can get good results t home. i'm going to use a merlin ls7 engine and full independant suspension. the look will be otherwise stock but slammed to the floor. the trunk lid is too flat so if i cant be bothered fixing that i'll rob the spare wheel from a monogran 36